Images
Additional Information
Product Info
Product Info
Short trips around town are a battery killer - don't go out and replace it, just hook up a SCA Fully Automatic 7 Stage Battery Charger and let it take care of the rest. Effortlessly simple, these units are not only capable of charging a completely discharged battery from zero volts, but also have an inbuilt diagnostic stage to ensure you don't spend time waiting on a dead cell. Suitable for most common chemistry types, this 12V battery charger can identify and apply the suitable charging profile to ensure that you're getting the best lifespan possible.
Inbuilt reverse polarity, surge, and overload protection means you can rest assured you and your battery are safe from power spikes or accidental terminal misconnection. This 10 Amp model is suitable for a range of mid to large-engine vehicles with batteries up to around 1100CCA in capacity. Don't get caught out by a flat battery, make an SCA car battery charger part of your maintenance routine.
Features
- Fully automatic 7 stage charging system - just connect and walk away
- Zero Volt start-up, enabling recovery and charging of a completely discharged battery
- Overload and short circuit protection to avoid irregular charge input damage to the battery
- Integrated battery test function notifies of faults so you don't waste time on a dead battery
- Automatic battery chemistry selection administers correct charging profile for GEL, Lead Acid, AGM, and Calcium
- Supplied with alligator clamps, and ring terminals for fixed connection
Tech Spec
Chemistry Types: | Standard Lead Acid / AGM / GEL / Calcium |
---|---|
Stages: | 1: Primary Analysis (Desulphation) / 2: Soft Start / 3: Bulk Charge / 4: Absorption / 5: Secondary Analysis / 6: Boost (Equalisation) / 7: Maintenance (Float) |
Voltage: | 12V |
Start Voltage: | 0 Volts |
Amperage: | 10A |
Protections: | Surge / Reverse Polarity / Overload / Short Circuit |
Suitability: | Batteries up to 1100CCA / 100AH |
Warranty: | 12 months |