Images
Details
https://www.supercheapauto.com.au/p/hardkorr-hardkorr-power-inverter-cable-kit-for-2000w-inverter/686873.htmlPromotions
Additional Information
Product Info
Product Info
The HardKorr Inverter Cable Kit 0AWG 250A Suits 2000W Inverter is purpose-built wiring for anyone connecting a HardKorr 2000W pure sine wave inverter to their battery. Two 750mm lengths of heavy-duty 0AWG (53.5mm²) cable — one positive, one negative — are sized to carry the high current a 2,000W inverter demands without voltage drop, keeping the inverter performing at full capacity.
Each cable end comes with a pre-crimped M8 ring terminal, while the negative lead also carries an M10 terminal on one end to simplify shunt installation for battery monitoring setups. The positive lead is fitted with a 250A ANL mega fuse inline, protecting the circuit against overload and short-circuit faults. Everything you need to make a safe, compliant inverter cable connection is included in one kit.
Features
- Designed for easy battery-to-inverter connection on HardKorr 2,000W pure sine wave inverters
- Two 750mm lengths of heavy-duty 0AWG (53.5mm²) cable — one positive, one negative
- Large cable cross-section eliminates voltage drop between battery and inverter
- Pre-crimped M8 ring terminals on each cable end for secure, tool-friendly installation
- M10 terminal on one end of the negative lead for direct shunt fitting
- 250A ANL mega fuse inline on the positive lead protects against overload and short circuits
Tech Spec
| Cable Gauge | 0AWG (53.5mm²) |
|---|---|
| Cable Length | 750mm each |
| Number of Cables | 2 (1 positive, 1 negative) |
| Terminal Type | Pre-crimped M8 ring terminals (M10 on one end of negative lead) |
| Fuse Rating | 250A ANL mega fuse |
| Maximum Inverter Compatibility | Up to 2000W |