Dupli-Color Vinyl and Fabric Aerosol Paint, Blue - 311g
Details
https://www.supercheapauto.com.au/p/dupli-color-dupli-color-vinyl-and-fabric-aerosol-paint-blue---311g/324090.html
Now
$10.00
^
Was
$15.00
on
20/07/24
$0.00
Promotions
Special Offer
Only select SCA stores can do fitments, please enter your location to see the closest.
Item No. 324090
Additional Information
Product Info
Product Info
Is this product for me?
Dupli-color range of vinyl paints are specifically designed for vinyl & fabric surfaces. They can be applied directly to the desired area and are fast drying to touch within 30 minutes. As they are formulated with an adhesion promoter they don't require a primer and set with a flexible crack/flaking & peeling resistant finish.
Safety instructions for removing lid:
To open insert a ¼” wide flat-blade screwdriver in slot,
Remove by rotating the handle of the screwdriver
Customer 18+
Dupli-color range of vinyl paints are specifically designed for vinyl & fabric surfaces. They can be applied directly to the desired area and are fast drying to touch within 30 minutes. As they are formulated with an adhesion promoter they don't require a primer and set with a flexible crack/flaking & peeling resistant finish.
Safety instructions for removing lid:
To open insert a ¼” wide flat-blade screwdriver in slot,
Remove by rotating the handle of the screwdriver
Features
- For use on interior vinyl seats, dash boards, door panels, shifter boots & consoles
- Resists cracking, flaking, & peeling
- Formulated with a maximum adhesion promoter so there's no need for primer
Tech Spec
Dupli-Color Vinyl and Fabric Paint Aerosol Paint - Blue, 311g
Volume: | N/A |
---|---|
Weight: | 311g |
Colour / Finish: | Various Colours Available |
Characteristics: | |
---|---|
Base: | Vinyl |
Paint Type: | Base Coat |
Heat Resistant: | 80 degrees celsius |
Preparation: | |
---|---|
Surface Preparation: | Clean compatible surface with Wax & Grease Remover |
Suitable Primer: | N/A |
Application: | |
---|---|
Application Method: | Aerosol |
Suitable Substrates: | Leather, Vinyl, Plastic & Fabric. *Spot test in inconspicuous area recommended. Always refer to manufacturers instructions prior to use. |
Thinning: | N/A |
Thinning Ratio: | N/A |
Recommended Application Temperature: | 10-30 degrees celsius |
Recommended Application Humidity: | Below 80% |
Finishing: | |
---|---|
Suitable Top Coat Clear: | N/A |
Coverage: | |
---|---|
Coverage: | 1-1.5m2 |
Number of Coats Recommended: | 2 coats |
Drying: | |
---|---|
Touch Dry Time: | 30 minutes |
Re-Coat Time: | 1 hour |
Full Cure Time: | 2 days |
Clean Up: | |
---|---|
Clean Up: | Acetone or Water |